vertical band saw

Band Saw Guides – Which One Do You Need?

There are kinds of band saw for you to select. So, you should know what they are and how to use them.

 

In order to get your vertical band saw working effectively for you, you should familiarize yourself with the various different band saw guides that are available.

 

You should also spend a little time understanding how to maintain them and keep them in tiptop shape. This will have a big impact on your blade performance and as such on your productivity.

 

Since a bandsaw guide can cost about $100 or so, you will be well rewarded if you look after yours, as you will not have to replace it as often as an uncared for guide in bad condition. There are many types of guides on the market today but it the main they are just variations of the ones I have listed below.

 

Sandwich Bandsaw Guide

 

These guides also go under the name of block guides and they hold the blade in place during the cutting. They are often used in sawmills and in situations where the need to produce volumes supersedes the requirement to save the blade.

 

Retrofit Roller Band Saw Guide.

 

This is basically a cross between two other types of guide, the Roller and the Bottom Control band saw guide. Under normal conditions the lower part of this guide has no contact with spinning blade. However if you hit a knot in the wood or some other type of bad spot, it will really come in to its own. It then prevents the saw from lurching into the timber and spoiling the cut, but after that it just sits there until the next time it is needed.

 

Grease Roller Guide.

 

This band saw guide has bearings that keep the blade straight as it passes between them. To prevent friction these bearings need to be free moving, hence the need for grease. So you must make sure that your guide can be greased. It is just like your automobile requires oil, otherwise over time the engine will seize and you will grind to a very expensive halt.

 

So as I said at the top, a little time spent maintaining your band saw will pay dividends down the line. It is always a good idea to refer to the manufacturers handbook for best advice on what steps to take and when.

 

And that by the way can go for any machinery you own.

 

If you would like any more information about bandsaws, try to use them and maintain them. Do check out the website of EVERISING, they are the company of specializing in producing vertical band saws and circular saws. There is lots of other valuable information about the wonderful bandsaw machine and how to get it working perfectly for you.

 

By the way, EVERISING Machine Co. is going to attend the grand B2B event – EMO Hannover 2017 in Sep. 18 ~ 23. If you have any interest in this exhibition information, welcome to visit Everising’s website or check out here: http://www.emo-hannover.de/

 

Start to pack your bag and get ready to attend this exciting B2B event – EMO Hannover 2017. GoGoGo!

 

Everising in EMO Hannover

EMO Hannover 2017! We are coming!

 

Article Source: http://EzineArticles.com/3608442

Share

Comments Off on Band Saw Guides – Which One Do You Need?

Guide to the Different Types of Band Saws

Band saws come in many different shapes and sizes, each with their own unique selling points and purpose. The band saw is regarded as one of the most versatile power tools on the market according to Popular Woodworking Magazine, renowned for its ability to cut through just about any material, however, it is not often the first machine purchased for a workshop.

 

The material you’re working with and type of project you’re completing will determine which of the different types of band saws to use. Vertical, horizontal, timber, and metal, cover just some of the band saws available.

 

This article will take you through some of the different types of band saws and some of their common uses, as well as a general guide to band saw safety that can apply to any type of this powerful tool.

 

Metal Band Saw

Of all the different types of band saw, a metal band saw is the ideal power tool for jobs that require you to cut through tough metal.

 

Metal cutting band saws generally fall into two categories, the vertical band saw and the horizontal band saw. The horizontal metal band saw is generally used to cut stock down to size, whereas the vertical one can be used for more intricate jobs such as filing, polishing, and contour cutting.

 

They do require some extra maintenance though and generally have some additional features built in. A coolant that keeps the blades lubricated and cool, as well as brushes or brushwheels that prevent metal chips from being caught in the blade, are both common to find on these types of band saws.

 

Unlike other saws, band saws have the unique ability to cut through a range of materials other than just wood, making them a popular tool in most workshops.

 

Wood Band Saw

A wood band saw is a popular choice among amateur and professional woodworkers. Often compared with the table saw as one of the most important power tools in carpentry, the wood band saw is a truly versatile machine.

 

While smaller stationary band saws are used in workshops, timber mills also operate large scale band saws for ripping lumber. The band saw has the unique ability to work with timber that’s of a larger diameter, and because they have a smaller kerf, or cut size, there is less of the quality timber wasted.

 

Wood band saws operate the same as any band saw, with the blades located on a continuous loop of metal teeth which perform succinct cuts through the timber.

 

Horizontal Band Saw

The horizontal band saw is one of the broader categories of band saw, favored by both amateur and professional carpenters. These types of band saws are useful for cutting longer materials down to size, however, not so ideal for producing complicated shapes or curved lines.

 

A horizontal band saw works by holding the material stationary while the band saw blade swings down through the cut. Once the cut is complete, the saw will automatically turn off with a switch trip to avoid potential injuries to the operator.

 

Some of the benefits of using a horizontal band saw include:

 

  • A quieter cut than most saws, making for a calmer workspace;
  • Extreme precision and accuracy when cutting straight lines;
  • The ability to set up your cut and then leave the machine to complete it, even turning off automatically once done;
  • Ability to cut wood, metal and plastics with ease;
  • No heat-affected zone after use, meaning safer operation with less risk of injury

 

Vertical Band Saw

A vertical band saw varies from its horizontal counterpart in how it cuts through the material. The saw itself doesn’t move, but rather the workpiece moves through the blade to create intricate cuts.

 

A vertical band saw is so versatile it can be used to create complicated shapes and lines that other types of band saws can’t compete with. As well as being adept at cutting complicated shapes, the vertical band saw can also perform precision cut straight lines, making it a great all-rounder power tool.

 

These saws have a superb cutting capacity and the ability to cut through materials fast, and with brush wheels installed they have safety measures in place to ensure chips don’t become stuck in its metal teeth.

 

Not only is the vertical band saw capable of cutting with ease, it also usually features a built in welder. The welder is useful for creating new blades or repairing old ones, and can even route the blade through the center of a part so that it can make interior cuts to the material.

 

Safety Guide

Although they’re often touted as one of the safest power tools around, you still need to be aware of the safety precautions for operating a band saw. A stationary band saw poses less of a threat than machines with a movable blade or saw which lowers their risk for injuries.

 

According to the Fine Woodworking Magazine, there are 12 cardinal rules for band saw safety that should be followed. These rules apply to all types of band saws and apply to working with any type of material, however, some styles may have extra rules regarding their safe operation.

 

  1. First and foremost, you should always consult the individual guidelines for your band saw as recommended by the manufacturer.
  2. Always ensure that fingers and other body parts are kept out of the path of the blade.
  3. When approaching the end of the cut, be sure to decrease the feed pressure.
  4. While the saw is in use always keep the wheel covers closed.
  5. Adjust the upper guide roughly quarter of an inch above your material before use.
  6. Always utilize the blade guard and keep it in place.
  7. Before changing blades, disconnect the band saw completely from its power source to avoid any accidental starts.
  8. As with any power tools, always wear eye protection while in the workshop.
  9. In the case of a broken or errant blade, ensure the machine has come to a complete stop before opening the wheel covers.
  10. If you have chips stuck in the throat, make sure you stop the saw before clearing the obstruction.
  11. To keep your fingers away from the blade, use push sticks that are stored in your miter slot.
  12. Always keep your workpiece in contact with the table at the exit point of the blade.

 

Conclusion

Not only is the band saw adept at making curvaceous cuts, but they can also perform precision cross cuts and rip lumber. If you have a quality band saw in your workshop you’ll already know how smooth their cuts can be, and performed with minimal effort.

 

If you’re looking for a band saw for your workshop, you’ll need to determine how much space you have available. There are some amazingly powerful and smaller bench top models that can still get the job done without taking up too much room.

 

For more band saws information, recommend you to visit the website of Actual Power Co., Ltd. Located in Taiwan, Actual Power is the professional fully automatic band saw manufacturer in the industry. And they provide a variety of high accuracy and high performance column band saws machine series to our customers. Welcome to visit the website of Actual Power, you can obtain more specification and details about automatic band saw series.

 

Article Source: http://bandsawhub.com/your-guide-to-the-different-types-of-band-saws/

Share

Comments Off on Guide to the Different Types of Band Saws

Simple Introduction of Vertical Band Saw

When manufacturing wood or metal products, making cuts with precision can be difficult, especially when cutting curves or other shapes. A vertical band saw is particularly useful for such functions. A vertical band saw is a stationary device that uses a rotating continuous band of metal with teeth on one side to cut various materials. The saw blade is mounted vertically, so that the blade runs perpendicular to the material being cut.

 

A vertical band saw can be powered by any number of sources. Early versions of the vertical band saw used wind power, steam power, and even animal power to run the blade. Modern versions of the vertical band saw are typically powered by an electric motor to provide a consistent power source that does not affect the speed or precision of the blade.

 

Lumber mills often use a vertical band saw to rip timber. Most mills prefer the use of the band saw as opposed to a circular saw for two reasons: one, the band saw can cut a larger diameter piece of timber, depending on the size of the blade and the machine, and two, the band saw has a smaller kerf, or cut width, which means less lumber gets wasted. Such large bandsaws are stretched over large wheels that prevent the blade from bending at such a degree that a break might happen. The blade is stretched very tight to aid in precision cutting.

 

Some versions of vertical band saws feature feed functions that help the person operating the saw to feed the piece of material through the machine. There are a few different types of feeds, ranging from gravity feeds to hydraulic feeds, and the type of feed used typically depends on the size of the saw and the type of materials being cut.

 

Cutting curves on a band saw is easier than doing so on other types of saws. The size of the curve depends largely on the width of the blade being used, the amount of lateral flexibility the blade will allow, and the size of the machine. Cuts are sometimes limited by the distance between the blade and the back of the machine, so for larger cuts, a larger machine is necessary. Today, many factories use automated band saws, which can be controlled by computer and do not necessitate a human operator to guide the functions. Such saws, however, often do need a human operator to feed the material into the machine.

 

Actual Power is the professional manufacturer of band saws machine in Taiwan. We provide various column type automatic and semi-automatic band saws. Moreover, we also manufacture high quality vertical band saw series to customers. If you need further information about band sawing machines, welcome to visit our website and feel free to contact Actual Power!

 

Article Source: http://www.wisegeek.com/what-is-a-vertical-band-saw.htm

Share

Comments Off on Simple Introduction of Vertical Band Saw