tool grinding machine

How to Use a Tool Grinding Machine

Tips! Do you know what you’ll need when you use a tool grinding machine? Tell you some essential tools below:

 

  • Heavy Work Gloves
  • Tool And Cutter Grinder Machine
  • Tools To Sharpen
  • Safety Glasses

 

 

Usage of Tool Grinding Machine

A tool and cutter grinder is used to sharpen the edges of tools that have gone dull. The tool grinding machine is not a toy and takes special care and training in order to operate correctly. The tool and cutter grinder is also a rather large machine found in machine shops. It is recommended to take your tools to a professional to grind and sharpen them. The following article will explain how a professional operates a tool grinding machine.

CM-A Tool Grinding Machine

CM-A Tool Grinding Machine

4 Steps to Correctly Use Tool and Cutter Grinder

Step 1 – Prime the Machine

It is always a good idea to turn the tool and cutter grinder on to warm it up. A cold grinder will create rough cuts while a warm or hot grinder disc will produce the best result. Allow the tool grinding machine to run for several minutes before taking tool to the grinding disc.

 

Step 2 – Safety Precautions

Just looking at the tool grinding machine suggests a medieval torture device. There is a lot of moving parts, guides and rails to worry about as well as the grinding disc itself. Always wear heavy work gloves when using the machine. You also need to wear safety goggles. The grinding disc is typically abrasive and made with diamonds. When grinder begins to sharpen the tool it can cause small fragments of the tool, the disc or sparks to fly toward your face. Getting any of these superheated fragments in your eye can be very dangerous.

 

Step 3 – Examine the Tool

Not all tools are made the same and it is important to examine the tool you are about to use the tool grinding machine on. You are looking for the angle of the tool, including which way the blade is curved, how the edges are cut and the contact points. This is incredibly important because to properly use the tool and cutter grinder you need to know what direction the tool needs to go. If you fail to do this, you can severely damage the tool you are trying to bring back to life.

 

Step 4 – Using the Tool Grinding Machine

Double check all of your safety areas and examine your clearance. The kind of tool you are using will determine what the settings need to be. For this information you should always consult the instruction manual that came with the machine you have access to. Not every tool grinding machine is the same when it comes to this. Turn the machine on and keep a safe distance from the grinding disc. Remember the curvature of the tool you are sharpening and place it against the grinding disc at the appropriate angle. A knife, for example, would be approximately 45 degrees. Use short movements and firm pressure until you are satisfied it is sharp.

 

 

Top Work manufactures cutter grinders and tool grinders, including universal tool grinder, CNC tool grinder and monaset tool grinder. They specialize in the grinder development to diversify our products and elevate the quality. Quality is an essential, inseparable part of every process at Top Work. For more information about tool grinding machine, welcome to check out Top Work’s website right away!

 

 

Article Source: http://www.doityourself.com/stry/how-to-use-a-tool-and-cutter-grinder

Share

Comments Off on How to Use a Tool Grinding Machine

Top Tool Grinder and Cutter Grinder Manufacturer – Top Work

Established in 1985, TOP WORK Industry Co., Ltd. is an expert of manufacturing cutter grinders and tool grinders, including universal tool grinder, CNC tool grinder and HOB sharpening machine. We specialize in the grinder development to diversify our products and elevate the quality.

 

We distinguish ourselves as a manufacturer with a strong engineering tradition and provides substantial added value in the tool grinders brought to market. Quality is an essential, inseparable part of every process at Top Work. In addition, a commitment for excellence is required of every employee at Top Work.

 

Our tool grinder series are certified by ISO 9001-2000 and CE certification, and won the R&D fund of government. In Taiwan, we get a good reputation because of the trust of our customers as well as the worldwide agents. That is the reason we can compete with the Europe competitors.

 

The name of Top Work Industry Co., Ltd. is the company’s doctrine. For an everlasting enterprise, every detail to be the TOP WORK is the goal of our company forever. Welcome to visit the website of Top Work, a variety of tool grinders and cutter grinding machines can be found on the site. If you need further specification about our products, do not hesitate to contact with us.

 

 

TOP WORK INDUSTRY CO., LTD.

No.9, 6th Road, Taichung Industrial District, Taichung 40755, Taiwan.

TEL: +886-4-2358-1558

FAX: +886-4-2358-1268

Share

Comments Off on Top Tool Grinder and Cutter Grinder Manufacturer – Top Work