injection molding machine

How to Choose The Right Injection Molding Machine?

In general, customers who have been in the injection molding industry for many years have the ability to judge and choose the right injection molding machine to produce. However, under certain conditions, the customer may need the assistance of the manufacturer to decide which specification of the injection molding machine to use, even if the customer may only have sample or idea of the product, and then ask whether the manufacturer’s machine can produce, or which model comparison Suitable for.

 

In addition, some special products may need to be equipped with special devices such as accumulators, closed circuits, injection compression, etc., in order to produce more efficiently. This shows that how to determine the right injection molding machine to produce is an extremely important issue. The following information is provided for reference only.

 

The important factors that often affect the selection of an injection molding machine include molds, products, plastics, molding requirements, etc. Therefore, the following information must be collected or available before making the selection:

 

  1. Mold size (width, height, and thickness), weight, special design, etc.
  2. The use of plastic types and quantities (single material or multiple plastic).
  3. The appearance size (length, width, height, thickness), weight, etc. of the injection molded product.
  4. Molding requirements, including a few, product quality, production speed and so on.

 

After obtaining the above information, you can follow the steps below to select the right injection molding machine:

 

  1. Choose The Right Type: Determined by the product and plastic models and series. Since there are many types of injection molding machines, it is necessary to determine exactly which type of injection molding machine or which series should be used to produce this product.

 

  1. Put It Down: Determine whether the “large pillar distance”, “die thickness”, “minimum die size” and “die plate size” of the machine are appropriate by the die size to confirm whether the die is released.

 

  1. Get Out: Judging from the mold and finished product “open mold stroke” and “travel mold stroke” is enough to allow the finished product to be removed.

 

  1. Locked Up: The “mold clamping force” is determined by the product and plastic. When the raw material is injected into the mold cavity with high pressure, it will produce a hold-up force, so the clamping unit of the injection molding machine must provide enough “clamping force” to prevent the mold from being opened.

 

  1. Shoot Full: Determine the required “shot volume” and select the appropriate “screw diameter” from the finished product weight and number of cavities.

 

  1. Shot Well: Some engineering plastics require high injection pressure and appropriate screw compression ratio design to have better molding effect. Therefore, in order to make the finished product shot better, the need for injection pressure and the compression ratio need to be considered when selecting the screw. .

 

  1. Shooting Fast: Confirmation of “injection speed”. Some finished products require high injection rate and rapid injection to stabilize molding, such as ultra-thin finished products. In this case, it may be necessary to confirm whether the injection rate and the injection rate of the machine are sufficient, and whether it needs to be matched with a pressure accumulator, a closed-loop control device, or the like.

 

After the above steps, in principle, injection molding machines that meet the requirements can already be determined. If you have requirement or need more information of energy saving injection molding machine, I recommend you to visit Multiplas Enginery Co., Ltd. – they specialize in manufacturing a wide range of injection molding machines. Today, contact with Multiplas for more details!

 

Article Source: http://www.fomtec-group.com/tech/shownews.php?lang=en&id=85

Share

Comments Off on How to Choose The Right Injection Molding Machine?

5 Major Advantages to Using Plastic Injection Molding for the Manufacturing of Parts

Plastic injection molding is extremely versatile method of producing parts and products. It is one of the preferred methods for manufacturing parts because it has multiple advantages over other methods of plastic molding. Not only is plastic injection molding simpler and more reliable, it is also extremely efficient. You should have no doubts about using this method to manufacture parts.

 

Here are 5 major advantages of using injection molding for manufacturing plastic parts and components.

 

  1. Detailed Features and Complex Geometry

 

The injection molds are subjected to extremely high pressure. As a result the plastic within the molds is pressed harder against the mold compared to any other molding process. Due to this excessively high pressure, it is possible to add a large amount of details into the design of the part.

 

Furthermore, due to high pressure during the molding process, complex and intricate shapes can easily be designed and manufactured which otherwise would have been too complicated and expensive to manufacture.

 

  1. High Efficiency

 

Once the injection molds have been designed to the customer’s specifications and the presses pre-programmed, the actual molding process is very quick compared to other methods of molding. Plastic injection molding process hardly takes times and this allows more parts to be manufactured from a single mold. The high production output rate makes plastic injection molding more cost effective and efficient.

 

  1. Enhanced Strength

 

In plastic injection molding, it is possible to use fillers in the injection molds. These filler reduce the density of the plastic while it being molded and also help in adding greater strength to the part after it has been molded. In fields where parts need to be strong and durable, plastic injection has an option that other molding processes do not offer.

 

  1. Ability to Use Multiple Plastic Types Simultaneously

 

One of the major advantages of using plastic injection molding for manufacturing parts is the ability to use different types of plastic simultaneously. This can be done with the help of co-injection molding, which takes away the worry about using a specific type of plastic.

 

  1. Automation to Save Manufacturing Costs

 

Plastic injection molding is an automated process. A majority of the injection molding process is performed by machines and robotics which a sole operator can control and manage. Automation helps to reduce manufacturing costs, as the overheads are significantly reduced. Furthermore, with reduced labor force the overall cost of manufacturing the parts is reduced and this cost saving can easily be passed on to the customer.

 

Furthermore, automation allows for making precise and accurate injection molds. Computer aided design (CAD) and computer aided manufacturing (CAM) allow close tolerances during the making of the molds.

 

The Bottom Line

 

Using injection molding also ensures the parts manufactured hardly require any work after the production. This is because the parts have more or less a finished appearance after they are ejected from the injection molds.

 

Today, plastic injection molding is an environment-friendly process. The scrap plastic generated during the production process is reground and re-used. Hence, the process generates very little waste.

 

If you need more information about injection molding, you can try to check out Multiplas’s website: www.multiplas-tw.com. They offer vertical injection molding machine, plastic injection moulding machine, multi-color injection molding machine, etc. Feel free to contact with Multiplas to gain further details.

 

 

Article Source: http://nanomoldcoating.com/5-major-advantages-to-using-plastic-injection-molding-for-the-manufacturing-of-parts/

Share

Comments Off on 5 Major Advantages to Using Plastic Injection Molding for the Manufacturing of Parts